microsoft.public.windowsce.platbuilder Google Group

Re: Problem with BSP include(s) and WINCEOEM=1 / _OEMINCPATHs

2009-11-23T13:37:40Z

$(SG_OUTPUT_ROOT) does not evaluate to C:\WINCE600\public\CEBASE\cesy sgen.
It evaluates to your OSDesign's CESYSGEN folder.
You should take a look at the build.log file to see which folders are
actually being used when that folder is built. Then check to see if you
have a wingdi.h in a different folder.

Re: Ethernet renew time

2009-11-23T13:41:55Z

Hello.
Here are the debugmsg:
After disconnect the cable following msg displayed:
0x87da0400: LanSetInterfaceLinkStatus(0017 2D30/001734A0) - 0 0
0x87da0400: SetInterfaceLinkStatus(IF 6) -> disconnected
0x87bca400: [NOTIFY] HandleSystemEvent 6 none
0x87c68950: NotifyChange: Setting Event 479FAB92
0x87a06828: TEL_IOControl(0x1E735DC, 17039424, 0x4D070, 2900, 0x0, 0, 0x0)

Re: Disable Usb host at runtime

2009-11-23T11:46:35Z

If you have the possibility to set the USB host port in suspend mode
setting or turn off the +5V in the host port I believe that the camera
will be disconnected.
Regards,
Jojje

Error on BuildUpMappingInfo....

2009-11-23T09:51:02Z

Hello,
I'm working on Windows CE 5.0 and Freescale BSP iMX31.
When the system startup I have the following trace message on serial :
...
...
0x8fe629cc: FLASHDRV.DLL:BuildupMappingInf o() - Unable to map logical sector
0x140aedd4 to physical sector 0x0001a50f
0x8fe629cc: FLASHDRV.DLL:BuildupMappingInf o() - Unable to map logical sector

Puzzles in the development of Nand Flash Driver under Wince 5.0

2009-11-23T06:50:09Z

Dear friends,
thanks advance for your assistance
The following is the detail for my case:
Platform: PXA270,
Os: Wince 5.0
FileSys: TFAT
NAND Flash:
Sector/Page Size:2048bytes;
Number of Sectors per Block:64;
Number of Block:8192
As the information above indicates, The total store space is 1G bytes(of

Re: Problem with BSP include(s) and WINCEOEM=1 / _OEMINCPATHs

2009-11-23T04:16:02Z

Hi Bruce,
You are correct. The problem is that the header files it is including do
not contain the right definitions for DEVMODE (part of GDI/display found in
wingdi.h.
The sources.cmn in the top room of the BSP folder has WINCEOEM=1 set. The
important lines from sources.cmn are:
_OEMINCPATH=$(SG_OUTPUT_ROOT)\ sdk\inc

Re: Problem with BSP include(s) and WINCEOEM=1 / _OEMINCPATHs

2009-11-23T03:22:14Z

Based on what you wrote, it is in fact finding all of the header files that
the code is including. If it didn't the error message would indicate that
it can't find an included file.
Instead the error is telling you that after including all of the files, it
can't find the definition for DEVMODE. That is different. That indicates

Problem with BSP include(s) and WINCEOEM=1 / _OEMINCPATHs

2009-11-23T00:41:01Z

I am having trouble building a routine included with a BSP I added into my
installation of Platform Builder. I know the problem is relating to the
include directories the complier is reading during a build.
For example (using command line debug build):
cd C:\WINCE600\PLATFORM\TI_EVM_35 30\SRC\TEST\SHELL

CEPC, serial KITL

2009-11-22T23:32:38Z

Can somebody explain to the novice how to enable serial KITL in WinCE 6.0.
CEPC ? My CEPC platform has an incompatible Ethernet adapter, so I am booting
to MS-DOS copying NK.BIN from the network share and then staring it with
loadcepc.exe It works great, I also can see debug messages on serial port.

cerial KITL in CEPC

2009-11-22T23:29:38Z

Re: How to enable DMA for PCI IDE CompactFlash?

2009-11-22T17:59:34Z

If you are using hive based registry, ensure the registry you set in REG
file is enclosed by "; HIVE BOOT SECTION" and "; END HIVE BOOT SECTION"
tags.
Also, you can verify the %_flatreleasedir%\reginit.ini to see if it is
overwritten by others.

Replacing standard shell with taskman

2009-11-21T22:38:57Z

I'm trying to include taskman in my build. The first step is to unselect
both the standard shell and the thin client shell in the catalog.
MSDN has a new page from 11/11/2009 that has instructions that don't seem to
work at
[link]
The result was a black screen but none of the keyboard commands worked. I

Re: Handles under CE6.0R2

2009-11-21T19:30:01Z

Our software needs about 120 handles normally.
Even that number is quite high i think (threads,fonts,brushes,windows etc...).
We are still searching for the cause of the handles running out.
One thing I tried is to put a retailmsg in handle.c, where the "completely
out of handles" error is given, and run a release version booting it from PB.

ToolsMsmCA(Error)

2009-11-21T19:20:53Z

ToolsMsmCA(Error): Setup package issue or CoreCon DataStore corrupted:
CDeviceSDKInstallShim Add/Remove failed. HR=0x80070005
this is the problem that i am getting while installing of windows CE
6.0. please help me with it.
regards

Re: ARM compiler in Microsoft Platform Builder 5.0

2009-11-21T12:50:01Z

I think that is better have multiple trees..
The actual situation is that the code generated by microsoft compiler isn't
optimized for the ARMv6....it isn't a good thing...I have alywas loved
Microsoft solution and products....but this isn't good..I have to think about
this.
Thanks,
Paolo